Data Grid - Filtering

Easily filter your rows based on one or several criteria.

The filters can be modified through the data grid interface in several ways:

• By opening the column menu and clicking the Filter menu item.
• By clicking the Filters button in the data grid toolbar (if enabled).

Each column type has its own filter operators. The demo below lets you explore all the operators for each built-in column type.

See the dedicated section to learn how to create your own custom filter operator.

Single and multi-filtering

Multi-filtering

The following demo lets you filter the rows according to several criteria at the same time.

One filter per column

You can also limit to only one filter per column while still allowing to filter other columns. For this, use the filterColumns and getColumnForNewFilter props available in slotProps.filterPanel.

Use cases

• Sometimes it's a limitation of some server-side filtering APIs to only allow one filter per column.
• You can also write custom logic to prevent some columns from being shown as possible filters.

This demo implements a basic use case to prevent showing multiple filters for one column.

Disable action buttons

To disable Add filter or Remove all buttons, pass disableAddFilterButton or disableRemoveAllButton to componentsProps.filterPanel.

Pass filters to the Data Grid

Structure of the model

The full typing details can be found on the GridFilterModel API page.

The filter model is composed of a list of items and a logicOperator:

The items

A filter item represents a filtering rule and is composed of several elements:

• filterItem.field: the field on which the rule applies.
• filterItem.value: the value to look for.
• filterItem.operator: name of the operator method to use (e.g. contains), matches the value key of the operator object.
• filterItem.id (): required when multiple filter items are used.

The logicOperator

The logicOperator tells the data grid if a row should satisfy all (AND) filter items or at least one (OR) in order to be considered valid.

// Example 1: get rows with rating > 4 OR isAdmin = true
const filterModel: GridFilterModel = {
  items: [
    { id: 1, field: 'rating', operator: '>', value: '4' },
    { id: 2, field: 'isAdmin', operator: 'is', value: 'true' },
  ],
  logicOperator: GridLogicOperator.Or,
};

// Example 2: get rows with rating > 4 AND isAdmin = true
const filterModel: GridFilterModel = {
  items: [
    { id: 1, field: 'rating', operator: '>', value: '4' },
    { id: 2, field: 'isAdmin', operator: 'is', value: 'true' },
  ],
  logicOperator: GridLogicOperator.And,
};

If no logicOperator is provided, the data grid will use GridLogicOperator.Or by default.

Initialize the filters

To initialize the filters without controlling them, provide the model to the initialState prop.

<DataGrid
  initialState={{
    filter: {
      filterModel: {
        items: [{ field: 'rating', operator: '>', value: '2.5' }],
      },
    },
  }}
/>

Controlled filters

Use the filterModel prop to control the filter applied on the rows.

You can use the onFilterModelChange prop to listen to changes to the filters and update the prop accordingly.

<DataGrid
  filterModel={{
    items: [{ field: 'rating', operator: '>', value: '2.5' }],
  }}
/>

Disable the filters

For all columns

Filters are enabled by default, but you can easily disable this feature by setting the disableColumnFilter prop.

<DataGrid disableColumnFilter />

For some columns

To disable the filter of a single column, set the filterable property in GridColDef to false.

In the example below, the rating column can not be filtered.

<DataGrid columns={[...columns, { field: 'rating', filterable: false }]} />

Customize the operators

The full typing details can be found on the GridFilterOperator API page.

An operator determines if a cell value should be considered as a valid filtered value. The candidate value used by the operator is the one corresponding to the field attribute or the value returned by the valueGetter of the GridColDef.

Each column type comes with a default array of operators. You can get them by importing the following functions:

You can find more information about the supported column types in the columns section.

Create a custom operator

If the built-in filter operators are not enough, creating a custom operator is an option. A custom operator is defined by creating a GridFilterOperator object. This object has to be added to the filterOperators attribute of the GridColDef.

The main part of an operator is the getApplyFilterFn function. When applying the filters, the data grid will call this function with the filter item and the column on which the item must be applied. This function must return another function that takes the cell value as an input and return true if it satisfies the operator condition.

const operator: GridFilterOperator = {
  label: 'From',
  value: 'from',
  getApplyFilterFn: (filterItem: GridFilterItem, column: GridColDef) => {
    if (!filterItem.field || !filterItem.value || !filterItem.operator) {
      return null;
    }

    return (params: GridCellParams): boolean => {
      return Number(params.value) >= Number(filterItem.value);
    };
  },
  InputComponent: RatingInputValue,
  InputComponentProps: { type: 'number' },
};

In the demo below, you can see how to create a completely new operator for the Rating column.

Wrap built-in operators

You can create custom operators that re-use the logic of the built-in ones.

In the demo below, the selected rows are always visible even when they don't match the filtering rules.

Multiple values operator

You can create a custom operator which accepts multiple values. To do this, provide an array of values to the value property of the filterItem. The valueParser of the GridColDef will be applied to each item of the array.

The filtering function getApplyFilterFn must be adapted to handle filterItem.value as an array. Below is an example for a "between" operator, applied on the "Quantity" column.

{
  label: 'Between',
  value: 'between',
  getApplyFilterFn: (filterItem: GridFilterItem) => {
    if (!Array.isArray(filterItem.value) || filterItem.value.length !== 2) {
      return null;
    }
    if (filterItem.value[0] == null || filterItem.value[1] == null) {
      return null;
    }
    return ({ value }): boolean => {
      return value != null && filterItem.value[0] <= value && value <= filterItem.value[1];
    };
  },
  InputComponent: InputNumberInterval,
}

Remove an operator

To remove built-in operators, import the method to generate them and filter the output to fit your needs.

// Only keep '>' and '<' default operators
const filterOperators = getGridNumericOperators().filter(
  (operator) => operator.value === '>' || operator.value === '<',
);

In the demo below, the rating column only has the < and > operators.

Custom input component

The value used by the operator to look for has to be entered by the user. On most column types, a text field is used. However, a custom component can be rendered instead.

In the demo below, the rating column reuses the numeric operators but the rating component is used to enter the value of the filter.

Custom column types

When defining a custom column type, by default the data grid will reuse the operators from the type that was extended. The filter operators can then be edited just like on a regular column.

const ratingColumnType: GridColTypeDef = {
  extendType: 'number',
  filterOperators: getGridNumericOperators().filter(
    (operator) => operator.value === '>' || operator.value === '<',
  ),
};

Custom filter panel

You can customize the rendering of the filter panel as shown in the component section of the documentation.

Customize the filter panel content

The customization of the filter panel content can be performed by passing props to the default <GridFilterPanel /> component. The available props allow overriding:

• The logicOperators (can contains GridLogicOperator.And and GridLogicOperator.Or)
• The order of the column selector (can be "asc" or "desc")
• Any prop of the input components

Input components can be customized by using two approaches. You can pass a sx prop to any input container or you can use CSS selectors on nested components of the filter panel. More details are available in the demo.

The value input is a special case, because it can contain a wide variety of components (the one provided or your custom InputComponent). To pass props directly to the InputComponent and not its wrapper, you can use valueInputProps.InputComponentProps.

Customize the filter panel position

The demo below shows how to anchor the filter panel to the toolbar button instead of the column header.

Server-side filter

Filtering can be run server-side by setting the filterMode prop to server, and implementing the onFilterModelChange handler.

The example below demonstrates how to achieve server-side filtering.

Quick filter

Quick filter allows filtering rows by multiple columns with a single text input. To enable it, you can add the <GridToolbarQuickFilter /> component to your custom toolbar or pass showQuickFilter to the default <GridToolbar />.

By default, the quick filter considers the input as a list of values separated by space and keeps only rows that contain all the values.

Initialize the quick filter values

The quick filter values can be initialized by setting the filter.filterModel.quickFilterValues property of the initialState prop.

<DataGrid
  initialState={{
    filter: {
      filterModel: {
        items: [],
        quickFilterValues: ['quick', 'filter'],
      },
    },
  }}
/>

Custom filtering logic

The logic used for quick filter can be switched to filter rows that contain at least one of the values specified instead of testing if it contains all of them. To do so, set quickFilterLogicOperator to GridLogicOperator.Or as follow:

initialState={{
  filter: {
    filterModel: {
      items: [],
      quickFilterLogicOperator: GridLogicOperator.Or,
    },
  },
}}

With the default settings, quick filter will only consider columns with types 'string','number', and 'singleSelect'.

• For 'string' and 'singleSelect' columns, the cell's formatted value must contain the value
• For 'number' columns, the cell's formatted value must equal the value

To modify or add the quick filter operators, add the property getApplyQuickFilterFn to the column definition. This function is quite similar to getApplyFilterFn. This function takes as an input a value of the quick filter and returns another function that takes the cell value as an input and returns true if it satisfies the operator condition.

In the example below, a custom filter is created for the date column to check if it contains the correct year.

getApplyQuickFilterFn: (value: string) => {
  if (!value || value.length !== 4 || !/\d{4}/.test(value)) {
    // If the value is not a 4 digit string, it can not be a year so applying this filter is useless
    return null;
  }
  return (params: GridCellParams): boolean => {
    return params.value.getFullYear() === Number(value);
  };
};

To remove the quick filtering on a given column set getApplyQuickFilterFn: undefined.

In the demo below, the column "Name" is not searchable with the quick filter, and 4 digits figures will be compared to the year of column "Created on."

Parsing values

The values used by the quick filter are obtained by splitting with space. If you want to implement a more advanced logic, the <GridToolbarQuickFilter/> component accepts a prop quickFilterParser. This function takes the string from the search text field and returns an array of values.

If you control the quickFilterValues either by controlling filterModel or with the initial state, the content of the input must be updated to reflect the new values. By default, values are joint with a spaces. You can customize this behavior by providing quickFilterFormatter. This formatter can be seen as the inverse of the quickFilterParser.

For example, the following parser allows to search words containing a space by using the ',' to split values.

<GridToolbarQuickFilter
  quickFilterParser={(searchInput) =>
    searchInput.split(',').map((value) => value.trim())
  }
  quickFilterFormatter={(quickFilterValues) => quickFilterValues.join(', ')}
  debounceMs={200} // time before applying the new quick filter value
/>

In the following demo, the quick filter value "Saint Martin, Saint Lucia" will return rows with country is Saint Martin or Saint Lucia.

apiRef

The grid exposes a set of methods that enables all of these features using the imperative apiRef. To know more about how to use it, check the API Object section.

Selectors

More information about the selectors and how to use them on the dedicated page

API

• GridFilterForm
• GridFilterItem
• GridFilterModel
• GridFilterOperator
• GridFilterPanel
• DataGrid
• DataGridPro
• DataGridPremium